Reinforced Stone (IndustrialCraft 2)
This article is in need of a clean-up. You can help the wiki by cleaning up the article. |
Reinforced Stone | |
---|---|
| |
Name | Reinforced Stone |
Source Mod | IndustrialCraft2 |
ID Name | IC2:blockAlloy
|
Type | Block |
Stackable | Yes (64) |
Blast Resistance | 540.0 |
Hardness | 80.0 |
Solid | Yes |
Transparent | No |
Affected by Gravity | No |
Emits Light | No |
Flammable | No |
Required Tool |
Reinforced Stone is a kind of stone from IndustrialCraft2 that is highly blast resistant. It takes a long time to mine, about as long as Obsidian. It is generally used to shield Nuclear Reactors to avoid large-scale destruction in case of an explosion. Please note that the recipe has changed from 1.4.7.
Recipe[edit]
Before 1.6[edit]
Since 1.6[edit]
Make CF Powder, put it into a Canning Machine on "Fluid Enrich" mode. Putting water on the left side and CF Powder in the middle. Using a Universal fluid cell filled with water, right click on the Canning Machine to put the water in the left side. Once it runs the water through the CF powder, you will have to right click the Canning Machine with the Universal fluid cell to remove the liquid construction foam, and right click a second time to put it back into the Canning Machine. Put the Canning machine into fill cell from tank mode, then you put a CF Sprayer in the top left. This will fill the CF sprayer with the construction foam. Next you spray an Iron Scaffold to get Reinforced Construction Foam. Finally right clicking the foam with a piece of Sand will get you Reinforced Stone.
CF Powder in canning machine (Fluid Enrich)
pipe water in on the left side pipe the foam out on the right
pipe the CF foam back in on the left side (Fill Cell mode) add a cf sprayer
take the sprayer with iron scaffold and sand
place the scaffold use the construction foam use the sand
mine the result
GregTech 5[edit]
Usage[edit]
Reinforced Stone (IndustrialCraft 2) can be used to create the following items:
|