LV-Transformer
LV-Transformer | |
---|---|
| |
Name | LV-Transformer |
Source Mod | IndustrialCraft2 |
ID Name | IC2:blockElectric:3
|
Type | Block |
Stackable | No |
Blast Resistance | 7.5 |
Hardness | 1.5 |
Solid | Yes |
Transparent | No |
Affected by Gravity | No |
Emits Light | No |
Flammable | No |
Required Tool |
The Low Voltage Transformer is used to turn Medium Voltage (MV) EU current into Low Voltage (LV) and back. This is useful for powering basic machines.
The LV-Transformer will take packets of up to 128 EU/p at 128 EU/t and then output them as 32 EU/p (LV) at a rate of 128 EU/t. One packet of 128 EU is transformed into four 32 EU packets, making it 128 EU/t. Low Voltage machines will only take packet sizes of up to 32 EU/p but will accept them at any amount of EU/t.
MV current must be wired into the High Voltage face (the 5-dotted one), while LV current can be wired into any other face. By default, the Transformer outputs LV current. A Redstone signal must be applied to it in order to make it reverse flow, thereby emitting MV current from the High Voltage face (the 5-dotted one). It can handle a maximum of one conversion per tick, limiting the maximum transfer to 128 EU/t in either mode. The LV Transformer can be picked up with any kind of pick, even a wooden pick. This is not the case for the higher-end transformers such as the MV-Transformer and the HV-Transformer.
Recipe[edit]
GregTech 5[edit]
Since 1.6[edit]
Before 1.6[edit]
Usage[edit]
LV-Transformer can be used to create the following items:Videos[edit]
|