HV Wire Connector
From ATLauncher Wiki
| HV Wire Connector | |
|---|---|
| |
|
| |
| Name | HV Wire Connector |
| Source Mod | Immersive Engineering |
| ID Name | Unknown |
| First Appearance | MC 1.7.10 |
| Type | Item |
| Stackable | Yes (64) |
The HV Wire Connector is used to input and output RF. The HV Wire Connector can only input and output 4096 RF per a tick and must be connected using a HV Wire Coil. The HV Wire Coil can be connected to a HV Wire Connector by right clicking on the connector. The wire can be removed using the Engineer's Wire Cutters on the HV Wire Connector. The HV Wire Connector cannot act as a relay instead the HV Wire Relay must be used to allow multiple HV Wire Coil segments to be joined or separated.
Recipe[edit]
Usage[edit]
HV Wire Connector can be used to create the following items:
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
