HV Capacitor (Immersive Engineering)
From ATLauncher Wiki
| HV Capacitor | |
|---|---|
.png)
| |
|
| |
| Name | HV Capacitor |
| Source Mod | Immersive Engineering |
| ID Name | Unknown |
| First Appearance | MC 1.7.10 |
| Type | Block |
| Stackable | Yes (64) |
| Solid | Yes |
| Transparent | No |
| Affected by Gravity | No |
| Emits Light | No |
| Flammable | No |
| Required Tool | 
|
The HV Capacitor is a block added by Immersive Engineering. The HV Capacitor stores 4,000,000 RF inside it, and has an input and output of 4,096 RF/t maximum. RF stored in the HV Capacitor is kept if the block is broken. To read the current value inside of the HV Capacitor use the Engineer's Voltmeter.
To set the input and output on the HV Capacitor use an Engineer's Hammer, right clicking the side of the HV Capacitor will place a blue and yellow square spot, that represents input, or an orange and yellow square spot, that represents output. Sneaking and right-clicking will place the input or output on the opposite side.
Recipe[edit]
Usage[edit]
HV Capacitor (Immersive Engineering) can be used to create the following items:
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
